If you want to flash stock firmware on Galaxy Note 7 , here we are providing the Stock Firmware of Galaxy Note 7. Root and TWRP Recovery is already available for Galaxy Note 7. But TWRP Recovery is still in testing stage, and Developer removes this from official thread due to some issues ,it didn’t work for everyone. If you are facing bootloop issue or any other problems after that, then you can download Stock Firmware of Galaxy Note 7 from below and flash it.

[ad type=”banner”]

Installing Stock ROM will unroot your device, Also if you soft bricked your device or facing bootloop issue or experience enormous lags, then you should download and Flash Stock Firmware of Galaxy Note 7. Samsung Galaxy Note 7 Stock ROM is not available for US carriers. The Galaxy Note 7 stock firmware are now available for many counties, and you can download that from below. Here is the step by step guide to install Stock Firmware on Galaxy Note 7.

Benefit of Stock Firmware :

  • Flashing Stock Firmware will downgrade/Upgrade your phone if you don’t like the new update.
  • Flashing Stock Firmware will Upgrade your phone.
  • Flashing Stock Firmware will fix bootloop issues.
  • Flashing Stock Firmware will completely Unroot your phone.
  • Flashing Stock Firmware will help to Revert back to Stock or Factory state (Helpful if you are facing force close error or any other lags)

Note :

  • This method is only for the Galaxy Note 7
  • Before downloading the Samsung Galaxy Note 7 firmware, check your device model number and download it accordingly.
  • Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your device.
  • It will erase all your phone data, so we advise you to take a complete backup of your device and then proceed.
  • Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process.

Download Stock Firmware of Galaxy Note 7 :

Steps to Install Stock Firmware on Samsung Galaxy Note 7 :

  • First, enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.

Developer Options

  • Now download the Stock Firmware from above.
  • Now Download the Odin tool from above and extract the zip file.
  • Run the 10.7.exe file on your PC.
  • Connect your Galaxy A9 Pro to your PC with the data cable and reboot into the Download/Odin mode.
  • To enter into download mode turn off your phone and press and hold the ‘Home + Volume Down + Power’ buttons together until you see the download mode screen.
[ad type=”banner”]

Volume up Button

  • Once you enter into Download mode, you see an ID: COM port turned blue and Added message in Odin message box means your device has recognized by Odin.

  • If ID: COM doesn’t show means your driver is not correctly installed or try it with different USB cable.
  • Now locate and add the stock firmware file .tar or .md5 file (you downloaded from above) to the AP/PDA tab in Odin.
  • Make sure that only these two options are tick “Auto Reboot” and “Reset Time“

Auto Reboot

  • Now click ‘Start‘ button and it will start flashing the file. Wait until you see ‘Pass‘ in Green Color on Odin screen. This step will Install Flash Firmware on Galaxy A9 Pro.

pass

So this is the complete guide to Install Stock Firmware on Galaxy Note 7 in easy steps.

Categorized in:

ANDROID

Tagged in:

, , , , , , , , , , , , , , , , , , , , , , , ,