• The most effective method to Change MAC Address in Windows, Linux – MAC address ridiculing and hacking 2017.This post will disclose to you the strategies of how to change mac address in windows, Linux. In this post there will be flawless answer for take care of your issue of changing the MAC addresses. You effortlessly do alterations of address physically or by utilizing software.MAC address is for all time planned network. We can change or farce them by utilizing some MAC address hacks, tricks. Learn the procedure of How to Change MAC Address in Windows, Linux.

Change MAC Address

What is MAC Address?

• These locations are outline for a changeless, they permit adjustments at a few components, or parodying, operating system can answer to the MAC addresses. These are by and large made for securing and helpful for security reasons, for example when interfacing with a Wi-Fi hotspot, or to guarantee interoperability. For the most part web administrations gives stows away or ties their securities as MAC locations; IF at some point the client’s changes arrange card the switch wouldn’t work any longer. The New interface and changing of the system address will takes care of the issue. Thus, the permit of a few virtual products are bound to the MAC addresses. Changing the MAC address along these lines is not perpetual, after a reboot it will return to the MAC address physically put away in the card. A MAC address is 48 bits in length. A MAC address is a physical equipment deliver doled out to every device that has the capacity of associating with a system. The web is simply a huge system. The MAC address is something that is allocated in the chip on the device and is not something the client can change.

Types of MAC address:

• Unicast address: This address is for a specific computer.
• Multicast address: This address is for a specific group of computers in network.
• Broadcast address: These address is generally for all computers in network.

How to Change MAC Address in Windows, Linux

• These are change mac address hacking tricks which help you a lot in changing the mac address in windows and Linux.

How to Change MAC Address in Windows

Windows

Solution 1: –

1. You can easily change the MAC Address in the Ethernet adapters properties menu.
2. Firstly, go to “device manager” and select” Network Adapters” menu.
3. Go to the Advance tab and you will see the “MAC Address”, “Locally Administered Address”, “Ethernet Address” or “Network Address”.
4. After opening advance tab, you will see the value. You will have to write your new MAC Address on this.
5. MAC addresses are 12-digit values, and should be entered without any dashes or colons. For example, if you want to make the MAC address “2A:1B:4C:3D:6E:5F”, you would enter “2A1B4C3D6E5F”.
6. Then restart your computer.
7. In this way not all the drivers support the changing of MAC addresses.

Solution 2:-

1. Firstly, you will have to be requiring for Administrative User Rights.
2. In order to easily identify your network adapter in the Windows Registry, you’ll want to gather some basic information about it through the Command Prompt. You can open the Command Prompt by typing “cmd” into the Run box (Windows key + R).
3. Type ipconfig /all and press Enter. Note the Description and Physical Address for the active network device. Ignore devices that aren’t active (Media Disconnected).
4. Type net config rdr and press Enter. Note the GUID, which is displayed between the “{}” brackets next to the Physical Address you recorded earlier.
5. You can start the Registry Editor by opening the Run dialog box (Windows key + R) and typing “regedit”. This will open the Registry Editor, which will allow you to change the settings for your network card.
6. Go to the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}.
7. You will found here the settings of each network interface. The ‘Network Address’ will be used to set the MAC address of the adapter when next it is enabled.
8. Resetting the adapter can be accomplished in script with the freely available command line utility.
9. There is tool which can change the MAC address of all cards.

[ad type=”banner”]

SMAC MAC Address Changer

Checking, Your MAC Address is changed or not?

1. If you will have to check your MAC address, go to Run, type CMD.
2. Then type” ipconfig /all” in the command prompt.
3. The number which is inside the physical address is the MAC address.
4. If multiple IP are displayed, you should look inside the label “Ethernet adapter x”, where x is the name of your connection (which is Local Area Connection by default).

How to Change MAC Address in Linux

LINUX – If you will have to change your MAC address in Linux, it is so easy. It takes two easy script commands:

ifconfig eth0 down hw ether 00:00:00:00:00:01
ifconfig eth0 up

1. These two little commands would set your eth0 interface to use the MAC 00:00:00:00:00:01.
2. Just plug in the NIC (Network Interface Card) you want to set and the MAC address you want to use into the commands above and you’re done.
3. Changing your MAC address is one of those things that is much easier to do in Linux then under Windows.