While Android cell phones have graduated to give you an experience where you use the screen to control for all intents and purposes everything, some value remains limited to gear keys. All the cell phones highlight a power/bolt key, volume rockers and some cell phones even accompanied equipment home, back and multitask buttons.  All in all, consider the possibility that one of these keys quits working. All things considered, it can be troublesome without a doubt. To be sure, if you have an Android PDA whose keys aren’t working, we have a response for you. With no further ado, here’s the way by which you can control your Android device with no gear gets:

Get your hardware keys on your screen:

Button Savior is a cool Android application (works for non-established gadgets as well) that brings on-screen catches for equipment keys like volume rockers, bolt catch, home, back, multitasking and you can even set custom substitute ways. It works an impressive measure like iPhone’s assistive touch, which infers it floats at the edge of the screen and can be gotten to from any application or screen. Along these lines, here’s the manner by which to set up Button Savior:

1. First install the Button Savior (Non-Root) app from the Play Store. After you have installed the Button Savior app on your Android device, you will have to enable the app in Settings->Accessibility by tapping on “Setup”.

2. Once done, you will see a little icon with an arrow like design at the right edge of the display. You can just tap on it to get the buttons for different actions and tap on the three dot icon for more buttons.

3. To add custom actions, just tap on the three-dot button twice and then, tap on the double square icon. Then, you will get various plus buttons to add custom icons, just tap on one. You can then choose from the various different actions like apps, open webpage, show notifications or quick settings and more.

Lock your phone from the screen:

If your lock button isn’t working, you can use the Button Savior application to bolt your telephone too however you should empower it. In the application, head over to “Advanced” tab. Here, you will discover the alternative to “Enable Screen Lock“. Tap on it and then, hit “Activate” to give the app administrator status, which implies it can’t be uninstalled. Once done, you will have the capacity to lock your phone via the lock icon in the Button Savior sidebar. To uninstall the application, you should first incapacitate the bolt choice.

The Button Savior application joins an a lot of various choices that you can look at. You can change the theme of the on-screen buttons, customize the buttons, icons and sidebar’s position, orientation and more. You can similarly control their direct, for instance, you can shroud them, empower a trigger mode, drift control andthat is quite recently the start. Some of the other features like the ability to reorder buttons, set the number of buttons in sidebar etc. are limited to the Pro version ($2.074) of the  application. The application is furthermore open in an alternate root adjustment for set up Android gadgets, which brings you significantly more control and choices.

Unlock your phone through the proximity sensor

While Button Savior gives, you lock your Android smartphone from the screen, there’s no real way to open your phone. For that, you can utilize the application called DTSO, which gives you a chance to open or bolt your gadget by tapping on the closeness sensor or shaking your gadget. For people unaware, proximity sensor is located on the top bezel of devices, beside the front facing camera. Thus, here’s the means by which to set up the DTSO application:

• When you first open up DTSO, you will see the “Unlock” and “Lock” options. Select one of the options, after which you will have to grant the app administrator rights by tapping “Activate “.

• Then, the app will present you info on how you can uninstall the app. Once you’ve read it, press “Ok“. Then, go to the “Unlock” option again where you will find three options to unlock: proximity unlock, shake to unlock and volume button unlock.

• Just enable “Proximity unlock”and tap on “Options” to set up the number of taps to unlock. Well, it’s all simple, isn’t it?

If you are just observing to lock & unlock your device without the hardware power/lock button and you don’t need the further virtual buttons that Button Savior offers, you can just use the DTSO app.

Hardware buttons not working? These apps come to your rescue

To sum things up, Button Savior carries you on-screen buttons for home, back, recents, volume and more, while the DTSO app lets you lock & unlock your device via the proximity sensor or by simply shaking your device. So, why use the buttons anymore? You can use these apps even if your device’s hardware buttons are not broken, considering finding these keys can be tough when you are using a massive smartphone like the Galaxy Note or other so-called phablets.